Michelin® safety shoes are made with high quality rubber outsoles combining both excellent slip resistant and wear qualities.
A key feature of the XHY662 Work Boot is its Waterproof construction. It combines a waterproof inner layer with the upper providing a barrier that helps keep water out and feet dry.
A key comfort feature of the XHY662 is its contoured removable orthotic TPU insole that is excellent for those seeking arch support. The polyurethane material used in its insole is known for its cushioning while not bottoming out features. The rigid TPU material helps provide underfoot support in the arch area.
In addition to meeting the highest ASTM F2413 Impact & Compression standards, Michelin® stock # XHY662 work boot also complies with ASTM F2413 Electrical Hazard standards. This type of work boot is made with insulating bottoms providing secondary electrical hazard protection to those areas dealing with open circuits under dry conditions, but also can be worn in work areas requiring only basic protective toe work boots.
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
This product is built with quality waterproofing materials to keep you dry in wet environments.
Michelin's exclusive Advanced Rear Suspension (ARS) providing shock absorption with every heel strike
An Advanced non-marking Michelin HydroEdge outsole that is oil and slip-resistant
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
6 Inches in height
Michelin O2F technology forces air through the vents, providing maximum circulation and ventilation
Rated 5 out of
This is the best pair boots i have ever wore. Make sure to coat with mink oil before using. That way if you work in mud, you can just hose them off. Let dry and re-apply. They will last several years in rough environment. Longer in regular use that's not in a constant wet environment. They are waterproof but any boot in a constant wet environment doesn't last as long. Good job Michelin.
Date published: 2020-06-25
Rated 5 out of
Great bootsI have bought 3 pairs of this boots and they are very comfortables
Date published: 2015-12-03
Rated 5 out of
Maintenance tech from
Very comfortable work bootThis is my fourth Michelin set of boots and my second pair of this specific model. My previous pair I'm finishing off until January 1st which will make a full two years in one set of boots at work. I average 45 hours a week in work boots in a factory setting. I've been working in factories as a maintenance technician for 13 years almost and this is by far the most comfortable pair of boots I've worn. Also the fact they lasted 2 years speaks for itself. They have good arch support. Soft soles and good traction on oily floors.
Date published: 2014-11-25
Rated 2 out of
okay fitThese boots aren't waterproof! I wouldn't recommend these boots for everyday wear .
Date published: 2020-04-07
Rated 1 out of
Arch supports to highGot these about a month ago. yes they did make a lot of noise. But the arch supports where very high and made my feet very sore. I tried insole with out arch supports but still made my feet hurt. If you don't have high arches don't get them.
Date published: 2020-03-05
Rated 1 out of
kyle mast from
this is a very comfortable boot but does not last very long. I have have had a couple pairs of these boots.I work at a tire shop and average 53 hours a week they only last me about 3 months
I work in oil refineries, in up n down stairs n scaffolding. In high temperatures. On my knees with my toes digging into gratings. I need a light agile boot. Would this be a good one
Asked by: Kd57
Yes this is an excellent light weight style especially when it comes to protective toe footwear.
Answered by: Conor M
Date published: 2019-09-04
He is a industrial electrician, he has to have steel toed boots. He is on his knee's a lot. The toe on most of his boots rips up because of crawling. What boot do you recommend that has maybe a more durable toe cover and lighter weight if possible.